Technical Points for the Use of Brush Cutters

1. Others stay away from lawn mowers

In the process of using the lawn mower, except for the person operating the lawn mower, there should be no one near the lawn mower. Although the lawn mower can be controlled, sometimes the lawn is inevitably slippery. The friction between the lawnmower and the ground is relatively small, and it is easy for the lawnmower to separate. Therefore, during the mowing process, people must avoid standing around the lawnmower, so as to avoid injuring other people.

2. All parts are installed completely

In the process of using the lawn mower, be sure to install all parts of the lawn mower completely, especially many lawn mowers have protective covers on them. Since the protective covers have blades, during use, be sure to protect The cover is installed and installed, which can avoid the motor burnout caused by the rope exceeding the installation range.

3. Do not use a lawn mower when it is wet

In the process of using the lawn mower, if it is relatively humid, in this case, it is best not to use the lawn mower, especially if it has just rained or the lawn has just been watered, if you use the lawn mower at this time, The ground is very slippery and the mower can be unstable to handle, so it is best to mow when the weather is clearer.

4. Regularly clean the inside of the lawn mower

In the process of using the lawn mower, it is necessary to clean the interior of the lawn mower regularly, because after the lawn mower has been used for a long time, there will inevitably be some fine grass inside the lawn mower. If these fine pieces are not cleaned for a long time, It is easy to affect the life of the motor, so after the lawn mower is used for a period of time, the interior of the lawn mower should be cleaned regularly.

5. Protect the blades of the lawn mower

In the process of using the lawn mower, be sure to protect the blades of the lawn mower. During the mowing process, there is some dense grass that may block the blades. At this time, the front end of the lawn mower should be decisively Turn off the power of the lawn mower at the same time, so that it is not easy to damage the motor of the lawn mower.

6. Control the speed of mowing

In the process of using the lawn mower, you must master the speed of mowing. If the grass is very dense during the mowing process, you must reduce the mowing speed at this time, and the speed should not be too fast. If the grass is not particularly dense, you can increase the mowing speed slightly.

7. Do not touch other hard objects

In the process of using the lawn mower, in order not to damage some parts of the lawn mower, do not let the lawn mower come into contact with other hard objects. Some flower pots, in this case, must be careful to avoid these objects when mowing the lawn.

8. Pay attention to storage

In the process of using the lawn mower, if the lawn mower has been used, it must be properly stored, and the lawn mower should be placed in a relatively dry and ventilated place, so that it is not easy to damage various parts of the lawn mower .

Taizhou Oute Tools Manufacturing Co.,Ltd. not only has Multifunctional Brush Cutter but also Power Grass Trimmer and other products, welcome to visit our official website.